Mesh Belt Dryer

It is a kind of batch, continuous production equipment.The main heating mode are electric heating and steam heating.Its main working principle is to spread the material evenly on net belt combined with 12-60 wire-mesh belt . The dried material is draged by the transmission device moving back and forth in the dryer machine. hot air passing through the materia, then water vapor is eliminated from the wet hole, so as to achieve the purpose of drying.The cabinet is combined by standard length section. In order to save space,The dryer can be made into multi-layer types,normally there are two room with three layers , two rooms with five layers.Its length can be 6-40 m and width is 0.6-3.0 m.
belt dryer


Suitable for material with high heat sensitivity, easily oxidized, low temperature drying, especially suitable for paste thick material. Dry extraGRT can achieve expansion effeGRT, easy crushing and dissolving.


1. mount of air, heating temperature, time of material sticking on the belt and velocity of feeding material can be adjusted in order
to obtain the best drying effect.
2. Equipments configuration is very flexible. It can use the netlike belt washing system and cooling raw material system
3. Hot air can be circular Unique air dividing device, it makes hot air distribute uniformly; this can guarantee products quality
4. Heating source can be selected from steam, conducting heat oil, electricity, coal furnace and oil burner
5. Hot air go through material layer from bottom to top and from top to bottom, it increases the contact area of material and hot air
and also the drying intensity.
6. We adopt unique internal air blowing device. It not only increases the relative speed of material and hot air and drying intensity
but also the uniform drying of materials.
7. It is fully enclosed structure. There is no outer air pipes except the dehumidifying air pipe, thus the materials won’t be polluted
and the heat efficiency and working condition are improved.
8. It is easy to contact with all parts inside the main machine, so it’s easy for cleaning.
9. The belt speed can be controlled easily to guarantee the final moisture of products.
10. Easy to assemble, after assembling the conveyor elevator the machines can be working.

Contact Us Now

Contact us